Feature:1. Stable Working: This pneumatic cylinder can work stably and efficiently under 0.15 to 1.0MPa without getting stuck.2. Double Action: Double action type allows for loading on both directions, which ensures reliable working performance.3. Secure Sealing: Sealing ring together with M30 cover thread enables firm and tight connection without leakage.4. Good Material: Having been through plating process, the aluminium alloy with high strength is not easy to deform.5. Easy to Install: Comes with small size and light weight, the installation can be easily completed in minutes.Specification:Item Type: CylinderProduct Material: Aluminium AlloyProduct Model: MAL40-75 Action Form: Double Action TypeWorking Medium: AirPressure Range: 0.15~1.0MPaOperating Temperature: -5~70℃End Cover Thread: M30Air Inlet Thread: G1/4Piston Rod Thread: M12Package List:1 x CylinderNote:1. When the load changes during work, a cylinder with sufficient output power should be selected;2. Under high temperature or corrosive conditions, corresponding high temperature or cylinders should be selected;3. The cylinder needs to be protected when there is high humidity, a lot of dust, water droplets, oil stains, and welding slag;4. Before the cylinder is connected to the pipeline, the dirt in the pipeline must be cleared to prevent debris from entering the cylinder;5. The cut off of the cylinder should be filtered by a filter element above 40M before it can be used;6. In a low temperature environment, measures for freezing prevention should be taken to prevent the water from sealing the system;7. Avoid side load, otherwise the piston rod will easily deform and damage the thread. The single action type cannot load in return;8. If the cylinder is not used for a long time after the removal, attention should be